Retrofit Your Cmm For Faster Measurement And Dynamically Share Results

Retrofit Your CMM For Faster Measurement and Dynamically Share Results

It is conservatively estimated that there are more than 150,000 Coordinate Measuring Machines (CMM) in active service globally. Very many of these are more than 10 years old and in fact since CMMs are not subject to the daily rigors of most other forms of manufacturing equipment many 25-year-old CMMs can still be found measuring precision parts on a daily basis.

The CMM structure has changed very little over the decades

Metrologic CMM Retrofit

CMM machine structures have become lighter through the use of advanced alloys and the accuracy of machines no longer derived from the precision of its mechanics; instead machines are manufactured to measure repeatably and error mapped using advanced algorithms in the software to attain final accuracy. As a result new generation CMM measure faster and produces more accurate results than older generation CMMs. CMM mechanical motion systems have moved away from the early rack and pinion drives to toothed drive belts resulting in near vibration-free motion, critical for today’s advanced high accuracy tactile scanning CMMs.

CMM manufacturers have continued to support much of their installed base of older CMMs and in addition a plethora of independent CMM service companies have sprung up around the world offering an alternative to OEM support.  Service and support has never been a real issue with older CMMs until becoming unreliable or spare part sourcing difficult.

CMM controller technology

Has advanced greatly in past years with more precise trajectory control resulting in machine accuracy improvement since the machine probe now touches the inspected part much closer to the programmed commanded position while providing a much smother motion with significantly reduced delays between direction changes and measuring points. Laurent Porte Managing Director of Metrologic Group states “Many CMMs we retrofit can measure the identical part post retrofit 30% faster due to the finesse of our new ME5011 CMM controller and the seamless efficiency of our multi-threaded Metrolog X4 inspection software; our ‘anticipation’ software feature eliminates the traditional ‘stop-go’ motion witnessed with older generation CMMs .”

As with all PC driven devices software technology has developed significantly with the advent of ‘ease of use’, CAD based programming/reporting and the standardization of the DMIS programming language providing, at least in theory, independent part-programs allowing portability between different brands of CMM software’s.

A CMM retrofit

Is defined as a complete CNC Controller and Software exchange which can also encompass replacing the measuring scales and rewiring of the machine. A CMM software upgrade is defined as replacing the existing CMM software with new but retaining the existing CMM controller. Laurent Port classified his companies CMM upgrade and retrofit activities as “Software upgrades typically occur with CMMs under 7 years old while a full CMM retrofit occurs on machines over 7 years old.”

The financial case for New CMM v CMM Retrofit is a major decision.

The cost of a CMM retrofit is almost independent of CMM measuring volume and as a consequence the economics of retrofit v new CMM favor the larger installed CMMs. Many CMMs are installed in quality rooms and extracting them to replace with a new CMM a logistical challenge. The disruption to production activities, which can incur major costs should also be taken fully into full consideration in the New v Retrofit cost analysis.

A typical retrofit involving rescaling of the CMM and a complete recabling, including full error mapping, and final calibration will take up to 2 weeks; for a company with only a single CMM the down-time of the CMM also has to be factored into the project. Training in the new software can be performed while the CMM is undergoing the retrofit although most customers prefer the training on their machine and parts at their facility.

7 Keys for Choosing CMM!

7 Keys for Choosing CMM!

Buying a CMM is big decision for any company because of it financial investment and its use. It is must before buying any CMM user should be sure about it purpose and its results. These days there are so many brands in the market about the CMM with different technology and sizes
This blog may help you to choose a right CMM for your dimensional inspection and fit for your company .

Size of the Machine

This is most important factor for the machine, it is totally depends on the size of the parts which you wants to measure. Machine working size in X, Y, Z direction should be 20% more than your maximum part size. You should consider the future requirements of the company as well.

Accuracy of the Machine

This is also very important factor and it is depends on the tolerance of the part which you wants to measure on that machine. Machine accuracy should be 10 times more than minimum tolerance of the part, if machine is not available than it should be 5 times and if that accuracy is also not available then it should be 2 times at least. Ex. If you have minimum tolerance in particular drawing 10micron then part should be measure at least 2 micron machine.

Probing System

This is very important part of the measuring machine, because this is part which comes directly contact of the mourning object. It has to be good and suitable to your measuring application. It can be Manual or motorized with limited angle or with unlimited angle. There are scanning probe also available for continuous scanning. Scanning probes can be laser based or contact based as per your requirements. It is also important before choosing the probing system what object you wants to measure, like parametrical part or free form parts.

Easy to Operate

This is also very important factor to be considered before choosing the equipment. You should evaluate how easy to use CMM which you are choosing because you need to invest in manpower who are going to use this CMM.

Reliability of the Equipment

There are so many equipments are there in market so user needs to compare reliability of all available equipments in market. It will help you in buying good equipment which will serve you for long run.

Maintenance of the CMM

CMM is costly equipment so maintenance of CMM is also required to be done yearly. This is very important to see capability of company how easily machine can be maintained. What kind of skill manpower required to deploy.

Budget

This is most important factor but we need to evaluate above factors as well to optimise the decision of buying a CMM.
If you are looking for some more information about choosing right dimensional equipment please send your contact information on contact us page we will contact you soon to solve your quires.